资源类型

期刊论文 420

年份

2023 33

2022 53

2021 39

2020 51

2019 25

2018 14

2017 12

2016 22

2015 20

2014 18

2013 13

2012 22

2011 16

2010 12

2009 12

2008 9

2007 12

2006 5

2005 5

2004 4

展开 ︾

关键词

人工神经网络 2

土壤 2

基质吸力 2

微波遥感 2

抗生素 2

玻璃钢 2

膨胀土 2

重金属 2

风化砂 2

ANSYS 1

DX桩 1

FRP 聚合物 1

PBO纤维片材 1

SWAT模型 1

互花米草 1

五螺箍 1

井塔冬期快速施工成套技术 1

井帮位移 1

产流 1

展开 ︾

检索范围：

排序： 展示方式：

Assessment of glass fiber-reinforced polyester pipe powder in soil improvement

《结构与土木工程前沿（英文）》 2021年 第15卷 第3期   页码 742-753 doi: 10.1007/s11709-021-0732-x

摘要： This study investigates the use of glass fiber-reinforced polyester (GRP) pipe powder (PP) for improving the bearing capacity of sandy soils. After a series of direct share tests, the optimum PP addition for improving the bearing capacity of soils was found to be 12%. Then, using the optimum PP addition, the bearing capacity of the soil was estimated through a series of loading tests on a shallow foundation model placed in a test box. The bearing capacity of sandy soil was improved by up to 30.7%. The ratio of the depth of the PP-reinforced soil to the diameter of the foundation model (H/D) of 1.25 could sufficiently strengthen sandy soil when the optimum PP ratio was used. Microstructural analyses showed that the increase in the bearing capacity can be attributed to the chopped fibers in the PP and their multiaxial distribution in the soil. Besides improving the engineering properties of soils, using PP as an additive in soils would reduce the accumulation of the industrial waste, thus providing a twofold benefit.

关键词： shallow foundation     sandy soil     bearing capacity     soil improvement     pipe powder    

HTML PDF 收藏

Seismic effects on reinforcement load and lateral deformation of geosynthetic-reinforced soil walls

《结构与土木工程前沿（英文）》 2021年 第15卷 第4期   页码 1001-1015 doi: 10.1007/s11709-021-0734-8

摘要： Current design methods for the internal stability of geosynthetic-reinforced soil (GRS) walls postulate seismic forces as inertial forces, leading to pseudo-static analyses based on active earth pressure theory, which yields unconservative reinforcement loads required for seismic stability. Most seismic analyses are limited to the determination of maximum reinforcement strength. This study aimed to calculate the distribution of the reinforcement load and connection strength required for each layer of the seismic GRS wall. Using the top-down procedure involves all of the possible failure surfaces for the seismic analyses of the GRS wall and then obtains the reinforcement load distribution for the limit state. The distributions are used to determine the required connection strength and to approximately assess the facing lateral deformation. For sufficient pullout resistance to be provided by each reinforcement, the maximum required tensile resistance is identical to the results based on the Mononobe–Okabe method. However, short reinforcement results in greater tensile resistances in the mid and lower layers as evinced by compound failure frequently occurring in GRS walls during an earthquake. Parametric studies involving backfill friction angle, reinforcement length, vertical seismic acceleration, and secondary reinforcement are conducted to investigate seismic impacts on the stability and lateral deformation of GRS walls.

关键词： geosynthetics     reinforced soil     retaining walls     seismic performance    

HTML PDF 收藏

Soil spatial variability impact on the behavior of a reinforced earth wall

Adam HAMROUNI, Daniel DIAS, Badreddine SBARTAI

《结构与土木工程前沿（英文）》 2020年 第14卷 第2期   页码 518-531 doi: 10.1007/s11709-020-0611-x

摘要： This article presents the soil spatial variability effect on the performance of a reinforced earth wall. The serviceability limit state is considered in the analysis. Both cases of isotropic and anisotropic non-normal random fields are implemented for the soil properties. The Karhunen-Loève expansion method is used for the discretization of the random field. Numerical finite difference models are considered as deterministic models. The Monte Carlo simulation technique is used to obtain the deformation response variability of the reinforced soil retaining wall. The influences of the spatial variability response of the geotechnical system in terms of horizontal facing displacement is presented and discussed. The results obtained show that the spatial variability has an important influence on the facing horizontal displacement as well as on the failure probability.

关键词： reinforced earth wall     geosynthetic     random field     spatial variability     Monte Carlo simulation    

HTML PDF 收藏

Stability analysis of a high loess slope reinforced by the combination system of soil nails and stabilization

Jiu-jiang WU,Qian-gong CHENG,Xin LIANG,Jian-Lei CAO

《结构与土木工程前沿（英文）》 2014年 第8卷 第3期   页码 252-259 doi: 10.1007/s11709-014-0260-z

摘要： While the soil nails and the corresponding compound technology are widely used as the support techniques for deep foundation pit and normal slopes, few related engineering cases are found for high loess slopes. By utilizing the finite element software of PLAXIS 8.5, the behavior of a high loess slope reinforced by the combination of soil nails and stabilization piles (hereinafter for CSNSP) is studied in this paper. It can be found that the potential slide surface of the slope moves to deeper locations during the process of the multi-staged excavations. The measure of reducing the weight of the top of the slope is a positive factor to the stability of the loess slope, while the rainfall is a negative factor. The slope can’t be stable if it’s reinforced only by stabilization piles or soil nails during the process of the multi-staged excavations. The soil nail contributes greater to the overall system stability when the excavation depth is relatively shallow, while the stabilization pile takes it over when the excavation depth reaches a large value. Compared to the results from the Sweden circular slip surface, the data derived from the method of phi/c reduction is relatively large when the slope is unreinforced or reinforced only by stabilization pile, and the data turns to be small when the slope is strengthened by soil nails or the combination system of soil nails and stabilization piles.

关键词： high loess slope     CSNSP     PLAXIS     phi/c strength reduction method     Sweden circular slip surface    

HTML PDF 收藏

Field testing of geosynthetic-reinforced and column-supported earth platforms constructed on soft soil

Qiangong CHENG,Jiujiang WU,Dongxue ZHANG,Fengping MA

《结构与土木工程前沿（英文）》 2014年 第8卷 第2期   页码 124-139 doi: 10.1007/s11709-014-0255-9

摘要： This paper is focused on the behavior of geosynthetic-reinforced and column-supported (GRCS) earth platforms in soft soil. By analyzing the data of a 15-month long field monitoring project, the bearing behavior and effectiveness of GRCS earth platforms are discussed in detail. It can be found that the soil arching is generated when the filling reaches a certain height. The measured pressure acting on the soil in the center of four piles was smaller than that acting on the soil between two piles. The elongation and the tension of the geogrid located in the soil between piles are both larger than the corresponding values on the pile top. The skin friction of piles is relatively small in the soil layer with low strength and the load transfer of the axial force in those layers is significant; meanwhile, the opposite situation occurs in the soil layer with high strength. The pore water pressure at shallow locations increases slightly with the filling height and is greatly affected by the increasing filling load. The layered settlement is directly proportional to the filling height, and the corresponding amount is relevant to the locations and the properties of specific soil layers. Additionally, the lateral displacement of the embankment increases with greater loading and decreases with increased depth. These suggest that the use of GRCS system can reduce lateral displacements and enhance the stability of an embankment significantly.

关键词： geosynthetic-reinforced and column-supported (GRCS) earth platforms     soft soil     bearing behavior     settlement and deformation     field testing    

HTML PDF 收藏

Reliability-based settlement analysis of embankments over soft soils reinforced with T-shaped deep cement

Chana PHUTTHANANON; Pornkasem JONGPRADIST; Daniel DIAS; Xiangfeng GUO; Pitthaya JAMSAWANG; Julien BAROTH

《结构与土木工程前沿（英文）》 2022年 第16卷 第5期   页码 638-656 doi: 10.1007/s11709-022-0825-1

摘要： This paper presents a reliability-based settlement analysis of T-shaped deep cement mixing (TDM) pile-supported embankments over soft soils. The uncertainties of the mechanical properties of the in-situ soil, pile, and embankment, and the effect of the pile shape are considered simultaneously. The analyses are performed using Monte Carlo Simulations in combination with an adaptive Kriging (using adaptive sampling algorithm). Individual and system failure probabilities, in terms of the differential and maximum settlements (serviceability limit state (SLS) requirements), are considered. The reliability results for the embankments supported by TDM piles, with various shapes, are compared and discussed together with the results for conventional deep cement mixing pile-supported embankments with equivalent pile volumes. The influences of the inherent variabilities in the material properties (mean and coefficient of variation values) on the reliability of the piled embankments, are also investigated. This study shows that large TDM piles, particularly those with a shape factor of greater than 3, can enhance the reliability of the embankment in terms of SLS requirements, and even avoid unacceptable reliability levels caused by variability in the material properties.

关键词： T-shaped deep cement mixing piles     piled embankments     settlement     reliability analysis     soil uncertainties    

HTML PDF 收藏

Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated

《结构与土木工程前沿（英文）》   页码 1100-1116 doi: 10.1007/s11709-023-0967-9

摘要： The performance of a new fiber-reinforced cementitious matrix (FRCM) system developed using custom-designed mortar and fabrics is investigated in this study. The behavior of this system is evaluated in terms of both the flexural and shear strengthening of reinforced concrete beams. Eight beams are designed to assess the effectiveness of the FRCM system in terms of flexural strengthening, and four specimens are designed to investigate their shear behavior. The parameters investigated for flexural strengthening are the number of layers, span/depth ratio, and the strengthening method. Unlike previous studies, custom fabrics with similar axial stiffness are used in all strengthening methods in this study. In the shear-strengthened specimens, the effects of the span/depth ratio and strengthening system type (fiber-reinforced polymer (FRP) or FRCM) are investigated. The proposed FRCM system exhibits desirable flexural and shear strengthening for enhancing the load capacity, provides sufficient bonding with the substrate, and prevents premature failure modes. Considering the similar axial stiffness of fabrics used in both FRCM and FRP systems and the higher load capacity of specimens strengthened by the former, cement-based mortar performs better than epoxy.

关键词： fiber-reinforced cementitious matrix     flexural strengthening     shear strengthening     carbon fiber-reinforced polymer     shear span    

HTML PDF 收藏

Numerical modelling of reinforced concrete flexural members strengthened using textile reinforced mortars

《结构与土木工程前沿（英文）》 2023年 第17卷 第4期   页码 649-668 doi: 10.1007/s11709-023-0919-4

摘要： Externally bonded (EB) and near-surface mounted (NSM) bonding are two widely adopted and researched strengthening methods for reinforced-concrete structures. EB composite substrates are easy to reach and repair using appropriate surface treatments, whereas NSM techniques can be easily applied to the soffit and concrete member sides. The EB bonded fiber-reinforced polymer (FRP) technique has a significant drawback: combustibility, which calls for external protective agents, and textile reinforced mortar (TRM), a class of EB composites that is non-combustible and provides a similar functionality to any EB FRP-strengthened substrate. This study employs a finite element analysis technique to investigate the failing failure of carbon textile reinforced mortar (CTRM)-strengthened reinforced concrete beams. The principal objective of this numerical study was to develop a finite element model and validate a set of experimental data in existing literature. A set of seven beams was modelled and calibrated to obtain concrete damage plasticity (CDP) parameters. The predicted results, which were in the form of load versus deflection, load versus rebar strain, tensile damage, and compressive damage patterns, were in good agreement with the experimental data. Moreover, a parametric study was conducted to verify the applicability of the numerical model and study various influencing factors such as the concrete strength, internal reinforcement, textile roving spacing, and externally-applied load span. The ultimate load and deflection of the predicted finite element results had a coefficient of variation (COV) of 6.02% and 5.7%, respectively. A strain-based numerical comparison with known methods was then conducted to investigate the debonding mechanism. The developed finite element model can be applied and tailored further to explore similar TRM-strengthened beams undergoing debonding, and the preventive measures can be sought to avoid premature debonding.

关键词： fiber reinforced polymer     textile reinforced mortar     finite element analysis     concrete damage plasticity     calibration and validation     parametric study    

HTML PDF 收藏

Fatigue shear performance of concrete beams reinforced with hybrid (glass-fiber-reinforced polymer+ steel

《结构与土木工程前沿（英文）》 2021年 第15卷 第3期   页码 576-594 doi: 10.1007/s11709-021-0728-6

摘要： Reinforced concrete beams consisting of both steel and glass-fiber-reinforced polymer rebars exhibit excellent strength, serviceability, and durability. However, the fatigue shear performance of such beams is unclear. Therefore, beams with hybrid longitudinal bars and hybrid stirrups were designed, and fatigue shear tests were performed. For specimens that failed by fatigue shear, all the glass-fiber-reinforced polymer stirrups and some steel stirrups fractured at the critical diagonal crack. For the specimen that failed by the static test after 8 million fatigue cycles, the static capacity after fatigue did not significantly decrease compared with the calculated value. The initial fatigue level has a greater influence on the crack development and fatigue life than the fatigue level in the later phase. The fatigue strength of the glass-fiber-reinforced polymer stirrups in the specimens was considerably lower than that of the axial tension tests on the glass-fiber-reinforced polymer bar in air and beam-hinge tests on the glass-fiber-reinforced polymer bar, and the failure modes were different. Glass-fiber-reinforced polymer stirrups were subjected to fatigue tension and shear, and failed owing to shear.

关键词： fatigue     shear     hybrid stirrups     hybrid reinforcement     fiber-reinforced polymer    

HTML PDF 收藏

Recent advances in geosynthetic-reinforced retaining walls for highway applications

Jie HAN, Yan JIANG, Chao XU

《结构与土木工程前沿（英文）》 2018年 第12卷 第2期   页码 239-247 doi: 10.1007/s11709-017-0424-8

摘要： Geosynthetic-reinforced retaining (GRR) walls have been increasingly used to support roadways and bridge abutments in highway projects. In recent years, advances have been made in construction and design of GRR walls for highway applications. For example, piles have been installed inside GRR walls to support bridge abutments and sound barrier walls. Geosynthetic layers at closer spacing are used in GRR walls to form a composite mass to support an integrated bridge system. This system is referred to as a geosynthetic-reinforced soil (GRS)-integrated bridge systems (IBS) or GRS-IBS. In addition, short geosynthetic layers have been used as secondary reinforcement in a GRR wall to form a hybrid GRR wall (HGRR wall) and reduce tension in primary reinforcement and facing deflections. These new technologies have improved performance of GRR walls and created more economic solutions; however, they have also created more complicated problems for analysis and design. This paper reviews recent studies on these new GRR wall systems, summarizes key results and findings including but not limited to vertical and lateral earth pressures, wall facing deflections, and strains in geosynthetic layers, discusses design aspects, and presents field applications for these new GRR wall systems.

关键词： bridge     geosynthetic     highway     reinforced     wall    

HTML PDF 收藏

Investigation on modeling parameters of concrete beams reinforced with basalt FRP bars

Jordan CARTER, Aikaterini S. GENIKOMSOU

《结构与土木工程前沿（英文）》 2019年 第13卷 第6期   页码 1520-1530 doi: 10.1007/s11709-019-0580-0

摘要： Fiber-reinforced polymer (FRP) bars are widely used as internal reinforcement replacing the conventional steel bars to prevent from corrosion. Among the different types of FRP bars, basalt FRP (BFRP) bars have been used in different structural applications and, herein, three already tested concrete beams reinforced with BFRP bars are analyzed using three-dimensional (3-D) finite element analysis (FEA). The beams were tested in four-point bending. In the FEA the behavior of concrete is simulated using the “Concrete-Damaged Plasticity” model offered in ABAQUS software. The research presented here presents a calibrated model for nonlinear FEA of BFRP concrete beams to predict their response considering both the accuracy and the computational efficiency. The calibration process showed that the concrete model should be regularized using a mesh-dependent characteristic length and material-dependent post-yield fracture and crushing energies to provide accurate mesh-size independent results. FEA results were compared to the test results with regard to failure load and crack patterns. Both test the results and the numerical results were compared to the design predictions of ACI 440.1R-15 and CSA S806-12, where CSA S806-12 seems to overestimate the shear strength for two beams.

关键词： basalt Fiber-reinforced polymer bars     reinforced concrete beams     finite element analysis     damaged plasticity model     design codes    

HTML PDF 收藏

Experimental study on shear behavior of reinforced concrete beams with web horizontal reinforcement

Dong XU,Yu ZHAO,Chao LIU

《结构与土木工程前沿（英文）》 2014年 第8卷 第4期   页码 325-336 doi: 10.1007/s11709-014-0080-1

摘要： In determining the shear capacity of reinforced concrete beams, current codes do not provide any calculation method to evaluate the influence of web horizontal reinforcement, although they exist as structural reinforcements (or skin reinforcement). The present paper comprises results of 11 reinforced concrete beams in an effort to investigate the influence of web horizontal reinforcement on the shear behavior of reinforced concrete beams. The primary design variables are the shear-span-depth ratio, different reinforcement ratio of stirrups and web horizontal reinforcement. Influence of web horizontal reinforcement on crack patterns and failure mode was studied. It was found that web horizontal reinforcement can increase the shear capacity of the beams and restrain growth of inclined cracks effectively. Test results are very valuable, as very few references of shear tests can be found focusing on the effect of web horizontal reinforcement on the shear capacity of the beams.

关键词： reinforced concrete beam     shear strength     web horizontal reinforcement     experiments    

HTML PDF 收藏

An experimental study on the flexural behavior of heavily steel reinforced beams with high-strength concrete

Yasser SHARIFI, Ali Akbar MAGHSOUDI

《结构与土木工程前沿（英文）》 2014年 第8卷 第1期   页码 46-56 doi: 10.1007/s11709-014-0237-y

摘要： In recent years, an emerging technology termed high-strength concrete (HSC) has become popular in construction industry. Present study describes an experimental research on the behavior of high-strength concrete beams in ultimate and service state. Six simply supported beams were tested, by applying comprising two symmetric concentrated loads. Tests are reported in this study on the flexural behavior of high-strength reinforced concrete (HSRC) beams made with coarse and fine aggregate together with Microsilica. Test parameter considered includes effect of being compressive reinforcement. Based on the obtained results, the behavior of such members is more deeply reviewed. Also a comparison between theoretical and experimental results is reported here. The beams were made from concrete having compressive strength of 66.81–77.72 N/mm and percentage reinforcement ratio ( / ) in the range of 0.56% – 1.20%. The ultimate moment for the tested beams was found to be in a good agreement with that of the predicted ultimate moment based on ACI 318-11, ACI 363 and CSA-04 provisions. The predicted deflection based classical formulation based on code provisions for serviceability requirements is found to underestimate the maximum deflection of HSC reinforced beams at service load.

关键词： high-strength concrete (HSC) members     flexural behavior     reinforced concrete     experimental results     ultimate moment    

HTML PDF 收藏

Predetermination of potential plastic hinges on reinforced concrete frames using GFRP reinforcement

Dominik KUERES; Dritan TOPUZI; Maria Anna POLAK

《结构与土木工程前沿（英文）》 2022年 第16卷 第5期   页码 624-637 doi: 10.1007/s11709-022-0832-2

摘要： In the past, glass fiber-reinforced polymer (GFRP)-reinforcement has been successfully applied in reinforced concrete (RC) structures where corrosion resistance, electromagnetic neutrality, or cuttability were required. Previous investigations suggest that the application of GFRP in RC structures could be advantageous in areas with seismic activity due to their high deformability and strength. However, especially the low modulus of elasticity of GFRP limited its wide application as GFRP-reinforced members usually exhibit considerably larger deformations under service loads than comparable steel-reinforced elements. To overcome the aforementioned issues, the combination of steel and GFRP reinforcement in hybrid RC sections has been investigated in the past. Based on this idea, this paper presents a novel concept for the predetermination of potential plastic hinges in RC frames using GFRP reinforcement. To analyze the efficiency of the concept, nonlinear finite element simulations were performed. The results underscore the high efficiency of hybrid steel-GFRP RC sections for predetermining potential plastic hinges on RC frames. The results also indicate that the overall seismic behavior of RC structures could be improved by means of GFRP as both the column base shear force during the seismic activity as well as the plastic deformations after the earthquake were considerably less pronounced than in the steel-reinforced reference structure.

关键词： glass fiber-reinforced polymer     GFRP     hybrid section     plastic hinge     seismic design     reinforced concrete    

HTML PDF 收藏

Experimental and modeling studies on installation of arc sprayed Zn anodes for protection of reinforced

Xianming SHI

《结构与土木工程前沿（英文）》 2016年 第10卷 第1期   页码 1-11 doi: 10.1007/s11709-016-0312-7

摘要： Arc sprayed zinc (Zn) anode on concrete surfaces has been an emerging technology for protecting reinforced concrete structures from rebar corrosion in coastal environments. Many cathodic protection (CP) systems with arc sprayed Zn anodes will reach or exceed their design life in the near future and thus may function improperly or insufficiently, making it necessary to replace the aged anodes. However, prior to this study, little was known about the most effective profile for the concrete surface, for either new concrete or old concrete with existing Zn anodes removed. This work develops criteria to properly prepare the concrete surface before the application of new Zn anode. Experimental studies were conducted both in the laboratory and for a field structure in Oregon. Artificial neural network was used to achieve better understanding of the complex cause-and-effect relationships inherent in the Zn-mortar or Zn–concrete systems and was successful in finding meaningful, logical results from the bond strength data. The goal is to achieve strong initial bond strength of new Zn to concrete, which is essential for long-term performance of the CP system. The results from this case study suggest that it is necessary to adjust the anode removal and surface sandblasting based on the electrochemical age of the existing concrete. In all cases of sandblasting, minimize the exposure of large aggregates (e.g., those bigger than 19 mm in diameter).

关键词： arc sprayed Zn     anode replacement     reinforced concrete     bridge preservation     neural networks     surface profile    

HTML PDF 收藏

标题 作者 时间 类型 操作

Assessment of glass fiber-reinforced polyester pipe powder in soil improvement

期刊论文

Seismic effects on reinforcement load and lateral deformation of geosynthetic-reinforced soil walls

期刊论文

Soil spatial variability impact on the behavior of a reinforced earth wall

Adam HAMROUNI, Daniel DIAS, Badreddine SBARTAI

期刊论文

Stability analysis of a high loess slope reinforced by the combination system of soil nails and stabilization

Jiu-jiang WU,Qian-gong CHENG,Xin LIANG,Jian-Lei CAO

期刊论文

Field testing of geosynthetic-reinforced and column-supported earth platforms constructed on soft soil

Qiangong CHENG,Jiujiang WU,Dongxue ZHANG,Fengping MA

期刊论文

Reliability-based settlement analysis of embankments over soft soils reinforced with T-shaped deep cement

Chana PHUTTHANANON; Pornkasem JONGPRADIST; Daniel DIAS; Xiangfeng GUO; Pitthaya JAMSAWANG; Julien BAROTH

期刊论文

Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated

期刊论文

Numerical modelling of reinforced concrete flexural members strengthened using textile reinforced mortars

期刊论文

Fatigue shear performance of concrete beams reinforced with hybrid (glass-fiber-reinforced polymer+ steel

期刊论文

Recent advances in geosynthetic-reinforced retaining walls for highway applications

Jie HAN, Yan JIANG, Chao XU

期刊论文

Investigation on modeling parameters of concrete beams reinforced with basalt FRP bars

Jordan CARTER, Aikaterini S. GENIKOMSOU

期刊论文

Experimental study on shear behavior of reinforced concrete beams with web horizontal reinforcement

Dong XU,Yu ZHAO,Chao LIU

期刊论文

An experimental study on the flexural behavior of heavily steel reinforced beams with high-strength concrete

Yasser SHARIFI, Ali Akbar MAGHSOUDI

期刊论文

Predetermination of potential plastic hinges on reinforced concrete frames using GFRP reinforcement

Dominik KUERES; Dritan TOPUZI; Maria Anna POLAK

期刊论文

Experimental and modeling studies on installation of arc sprayed Zn anodes for protection of reinforced

Xianming SHI

期刊论文